点击图片查看原图
[VIP第1年] 指数:1
840-900 type double-layer tile press commissioning method:
1. First, the four corners of the front and back lines of the tile press machine are the same height from the big frame to the upper end of the shaft, and then from the row to the back row, find a line to straighten, check whether the lower shaft is in a straight line, and adjust the left and right sides of the lower shaft to the level.
2, the tile press machine equipment row and the back row to find a good center, and then tighten the two sides of the lock mother, in the middle of the center of the wheel before and after pulling a straight line, the upper and lower shaft gap adjustment, you can adjust the machine along the line.
3, the debugging method of the tile press plate deviation, such as the board running to the right, the left corner of the pad (feed frame), or the right bottom flat (a few axes running off a few axes flat, the upper shaft falling with the bottom shaft).
Main technical parameters of type 840-900 double layer tile press:
1, equipment production model: JK25-210-840/JK15-225-900
2, equipment dimensions: 6300mm*1300mm*1200mm
3. Total weight of equipment: 2600kg
4, the main frame structure: 250 channel steel welding
5, equipment plate thickness: 16mm
6, rolling molding rows: upper: 9 rows (900) Lower: 11 rows (840)
7, molding shaft material: 45# steel quenching treatment
8, molding shaft size: diameter 70(solid)
9. Molding roller material: 45# steel plated with hard chrome
10, transmission mode: sprocket chain drive
11. Sprocket chain specification: 0.6 inch
12. Total power of equipment: 6KW
13, molding machine power: 3KW
14, equipment molding speed: 8-10 meters/min
15, rolling material thickness: 0.3-0.8mm
16, equipment inlet plate width: 1000mm/1000mm (can be customized widening type, widening type inlet plate width: 1200mm/1200mm)
17, computer control system: The equipment adopts PLC industrial computer control system, the system contains 5.7 inches Taiwan Delta LCD screen, English and Chinese control program
