Jinhui tile press introduces the equipment technical parameters of 840-900 double-layer color steel tile press
Molding machine production model SB 840/910
The overall dimensions of the equipment are 6300mm*1300mm*1200mm
The total weight of the equipment is 3T
The main frame is welded with 300 H steel
Number of rows of rolling molding Bottom: 11 rows Upper: 9 rows
Molding shaft material 45# steel quenching treatment
Molding shaft size φ70
Molding roller material 45# steel plated with hard chrome
Drive mode Sprocket chain drive
Sprocket chain specification 0.6 points
Total power: 6 KW
The molding speed of the equipment is 8-10 m/min
Rolling material thickness 0.3-0.8mm
Color steel tile press computer control system PLC control electrical appliance model Taiwan Delta
LCD 5.7-inch LCD screen, including English and Chinese control program
The working principle adopts the automatic industrial computer PLC control system to accurately control the size of the plate, the precision of the plate and the rolling speed
Color steel tile press hydraulic shear system shear die material Cr12 high temperature quenching treatment
Hydraulic shear power 3 KW
Working principle using hydraulic shear system, using gear oil pump working principle. The system includes one hydraulic pump station, one hydraulic cylinder, two hydraulic tubing and two sets of solenoid valves.
Tile pressing machine is the color coated roll press forming, forming color steel tile and galvanized tile machine. That is, a machine specializing in the production of color steel tiles.
The composite plate machine is an automatic machine that uses two color steel tiles as upper and lower iron, and uses a strong adhesive to stick the middle sandwich material (such as foam, rock wool, glass wool, etc.) to form a thermal insulation material.
Color steel tile press equipment maintenance method: 1, in strict accordance with the operating procedures to operate. 2, each time before starting according to the lubrication chart requirements of time, fixed point, quantitative lubricating oil, oil should be clean without precipitation. 3, tile press equipment must be kept clean, unpainted part of anti-rust grease. 4, the lubricating oil in the motor bearing should be replaced regularly and filled, and often check whether the electrical part of the work is normal and safe and reliable. 5, regularly check whether the triangle belt, handle, knob, button is damaged, serious wear should be replaced in time, and report spare parts to supplement. 6, regular check and repair switches, insurance, handle, to ensure its reliable work. 7, 10 minutes before work every day, the machine oil lubrication and scrubbing clean machine. 8, strictly prohibit non-designated personnel to operate the equipment, usually must do people off the machine stop.
Contact number: 13633176399 (wechat same number)
Contact wechat: 13633176399 (wechat same number)
Contact us at 59458991@qq.com
Website: http://www.13832771638.com
Origin: Hebei, China